
Nowadays, there are so many products of 12 volt cooling fan power supply in the market and you are wondering to choose a best one.You have searched for 12 volt cooling fan power supply in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 12 volt cooling fan power supply which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
593 reviews analysed
1. Thermaltake Smart 500W 80+ White Certified PSU, Continuous Power with 120mm Ultra Quiet Cooling Fan, ATX 12V V2.3/EPS 12V Active PFC Power Supply PS-SPD-0500NPCWUS-W
Feature
- Delivers 500 Watt Continuous output @ +40 degree. Compliance with Intel ATX 12 Volt 2.31 & EPS 12V 2.92 standards
- 80 PLUS Certified, 80percentage efficiency under typical load
- Supports (2) PCI E 6+2pin Connectors. Active (PFC) Power Factor Correction, MTBF: 100,000 hours
- Industry Grade Protections: (OPP) Over Power Protection, (OVP) Over Voltage Protection, (SCP) Short Circuit Protection
- High Quality Components
- Equipped with a powerful +12 Volt rail, superior performance under all types of system loading
- 5 Year Warranty
Description
Incorporating various high-quality components, The smart series – models are Rated from 500W to 700W – saves energy through its high efficiency of up to 86% and accommodates any mainstream build with the most demanding requirements. An embedded intelligent cooling fan delivers excellent Airflow at an exceptionally low noise level. Additionally, the single +12V rail design enables non-stop usage with stable and reliable performance. Smart Series adopt 120mm cooling fan delivers excellent Airflow at an exceptionally low noise level. Smart Series saves energy through its high energy efficiency of up to 86% and is 80 PLUS standard Certified. High quality components enable non-stop usage with stable and reliable performance, no more capacitor explosion and leakage. Single +12V output.
p/N: ps-spd-0500npcw-w
short P/N: spd-0500p
model: sp-500ah2nkw
type: Intel ATX 12V 2.3
max. Output capacity: 500w
color: black
dimension (H x W x D): 86mm x 150mm x 140mm
pfc (power factor correction): active pfc
power good signal: 100-500 msec
hold up time: 16msec (minimum) within 60% load
input current: 8a max
input frequency range: 50 Hz – 60 hz
input voltage: 100Vac – 240vac
operating temperature: 5℃ to +40℃
operating humidity: 20% to 85%, non-condensing
operating temperature: -40 ℃ to +55 ℃
operating humidity: 10% to 95%, non-condensing
cooling system: 120mm fan: 1800 R.P.M. 10%
efficiency: 82-86% efficiency @ 20-100% load
mtbf: 100, 000 hrs minimum
safety Approval: CE/CB/TUV/ UL/ fcc
pci-e connector: PCI-E 6+2pin x 2
2. ELUTENG 120mm Fan 12V with Power Adapter, Ventilation Fan with 3 Speed Control Cooling Blower Compatible for Receiver, Router, Laptop, DVR, Playstation, Computer Cooling
Feature
- 【12V cooling fan】12V 1A 120mm fan with speed switch, the wind is stronger. ***NOTE: The higher the wind speed, the louder the noise
- if a quiet environment is required, adjust the speed to a low level.
- 【3 Speed】3 speeds of wind speed control to meet your different needs. Air volume: 53/64.5/82.6 CFM
- Speed: 1500/2000/2500 RPM.
- 【More Stronger Wind】7 blades maximize airflow, the speed can reach up to 2500RPM, and the air volume can reach 82.6CFM. Suitable for cooling PC / laptop / TV box / receiver / AV cabinet / PS4 / projector / router.
- 【Charge and Play】12cm ventilation fan power supply by 12v 1a power adapter, powerful wind, plug and play, very convenient.
- 【Fully Protection】Square Air fan with Metal grill on both sides, protect your hands, and keep cable without damage by blade of ventilation fan. Please feel free to contact us with any questions.
Description
ELUTENG 120mm Ventilation Fan
Equiped with 3 – Speed Controller
Allow you to set fan’s airflow and noise level.
High Speed: 2500RPM, 38.5dBA
Medium Spepd: 2000RPM, 33dBA
Low Speed: 1500RPM, 29dBA
Choose the right speed according to different needs, small size, bring more convenience to your life.
Note: The higher the wind speed, the louder the noise; if a quiet environment is required, adjust the speed to a low level.
Specifications:
Application equipment: PC / laptop / TV box / receiver / AV cabinet / PS4 / projector / router
Power: 12V 1A power adapter
Parameter (L / M / H):
Air volume: 82.6 / 64.5 / 53 CFM
Speed: 2500 / 2000 / 1500 RPM
Noise: 29 / 33 / 38.5 dB
Voltage: 6 / 9 / 12 V
Current: 0.13 / 0.2 / 0.27 A
Size: 12cm * 12cm * 2.5cm
Line Length: 100cm
Package Contents:
12cm Cooling Fan * 1
12V 1A Power Adapter * 1
Screws * 1
3. Universal Compact Bench Power Supply – 12 Amp Linear Regulated Home Lab Benchtop AC-to-DC 12V Converter w/ 13.8 Volt DC 115V AC 270 Watt Power Input, Screw Type Terminals, Cooling Fan – Pyramid PS14KX, BLACK
Feature
- CONVERTS AC TO DC: The Pyramid Bench Power Supply features linear/regulated design. Provides convenient and reliable AC-to-DC power conversion (12V DC) w/ constant source of DC voltage. Works w/ cellular phones, CB radio, scanner, HAM radio, etc
- SCREW-TYPE TERMINALS: Features universal hardwired screw-type connection terminals that ensure compatibility with a wide range of devices, equipment, and components. Used for component and device equipment testing, operation and performance
- PLUG-IN OPERATION: The simple plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion. Switch-activated power control eliminates the need for an external battery or additional power source
- SHORT-CIRCUIT PROTECTION: Equipped w/ built-in electronic overload and short circuit protection to ensure the safety of the operator and any connected electrical devices. Also, fuse protected w/ auto reset. Perfectly safe for tabletop or desktop placement
- BUILT-IN COOLING FAN: The power converter features a cabinet heatsink and a built-in cooling fan to prevent the device from overheating. Constant amperage is 12A and surge is 14A w/ power output of 13.8V DC and 115V AC 60Hz 270W power input
Description
Pyramid Model : PS14KX12 Amp Hobbyist Bench Power SupplyBench Power Supply, AC-to-DC Power Converter (12 Amp) Features:Linear / Regulated Power Supply DesignAC-to-DC Power ConversionProvides Constant Source of DC VoltageSimple Electronic Plug-in OperationHassle-Free Screw Terminal ConnectorsEliminates the Need of Battery or External Power SourceFuse Protected with Auto-ResetElectronic Overload & Short Circuit ProtectionUsed for Component & Device Equipment Testing, Operation & PerformanceRugged & Durable Housing Construction, Cabinet HeatsinkBuilt-in Cooling FanPower ON / OFF SwitchPyramid Compact Hobby Power Supplies Safe for Tabletop PlacementTechnical Specs:Amperage: 12.0 AMP (Constant), 14.0 AMP (Surge)Connectors / Hardwire Terminals: Red Positive (+), Black Negative (-)Power Output: 13.8V DCPower Input: 115V AC, 60Hz (270 Watt)Dimensions (L x W x H): 7.9” x 7.2” x 4.7” -inchesThe Pyramid Power Supply provides convenient and reliable AC-to-DC power performance. Universal hardwired screw-type connection terminals are hassle-free and ensure compatibility with a wide range of device equipment & components. Simple electronic plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion. Switch-activated power control eliminates the need of an external battery or an additional power source — while the built-in electronic overload and short-circuit protection ensure safety for the operator & any connected electrical devices. The Pyramid Bench Power Supply makes for a great addition to any hobbyist work desk or equipment testing station.
4. GeeekPi Raspberry Pi DockerPi Power Board For Raspberry Pi 4 Model B & Raspberry Pi 3B+, Power Supply with Safe Shutdown Auto Cooling Fan Expansion Board for Stack DockerPi Module & Raspberry Pi 2B/3B
Feature
- DockerPi PowerBoard is used to power the Raspberry Pi (or similar SBC) with a typical power of up to 20W (5V/4A) and can run up to 25W (5V/5A) with good heat dissipation.
- DockerPi PowerBoard also provides power to other DockerPi modules to protect the security of the power supply. It also provides a safe shutdown function, supports IR remote control switch, button control switch (Requires Driver,One-Step Automated Install).
- DockerPi PowerBoard has fan cooling, and we recommend that you install the DockerPi PowerBoard on the bottom of the other DockerPi.
- DockerPi PowerBoard recommends 12V 2A or above power input and 12V power from 4-pin headers to other DockerPi. (If other modules require 12V power)
- Wiki:https://wiki.52pi.com/index.php/DockerPi_PowerBoard_SKU:_EP-0104
5. ZRM&E 2pcs 1 to 4 PC Fan Speed Regulation Cable D Type Large 4Pin IDE Male Port to 4 3Pin 12V/5V Fan Power Male Ports CPU/Case Cooling Fan Connector Power Extension Cable 12cm
Feature
- Type: 1 to 4 D Type Large 4Pin IDE Male Port to 3Pin PC Cooling Fan Male Port Power Supply Speed Regulation Cable
- Function: Solve the problem that PC motherboard 3Pin interface port is not enough.
- Cable Length: 12cm.
- Interface Port: One side is large 4 Pin IDE male connector, and the other four sides are 3 Pin PC cooling fan male connector. 1 to 4 speed regulation extension line. l
- Use: To extend PC board 3Pin cooling fan interface port and adjust fan speed.
Description
Feature:
Type: 1 to 4 D Type IDE 4Pin to 3Pin Cooling Fan Converter Power Connector Extension Cable
Cable Length: 12cm
2 Level Speed Control: 12V (FULL Speed), 5V (LOW Speed)
Connector 1: D Type Large 4 Pin IDE Male Connector, power supply input, can start 2 way 12V or 5V fans at the same time. Also can be used as speed reduction line.
Connector 2: 2 way 12V 3 Pin PC cooling fan male connector (Yellow + Black)
Connector 3: 2 way 5V 3 Pin PC cooling fan male connector (Red + Black)
Use: This convert cable can be used to convert computer case power to 3Pin cooling fan interface, providing electricity for CPU fan and graphics card fan and adjusting the 3 Pin fans speed, to solve the problem that PC motherboard interface port is not enough. Most of the fans can use it directly.
Package Content:
2pcs 1 to 4 Large 4Pin IDE to 3Pin Cooling Fan Convert Cable
6. Coolmax 240-Pin 400 Power Supply with 1×80 mm Low Noise Cooling Fan (I-400)
Feature
- ATX12V version 2.0
- Single +12V output design
- Serial ATA 150 ready
- Total Power: 400 W. Input- 100 ~ 132V AC / 200 ~ 264V AC
- Connector: 1x 20+4-pin Main Connector
- 1x?P4 Mainboard Power Connector
- 2x 15-pin SATA Connectors
- 3x Peripheral Connectors
- 1x 4-pin Floppy Connector
- Cooling System: 1x 80mm Low Noise Cooling Fan
Description
Coolmax I-400 400W ATX 12V V2.0 Power Supply with 1×80 mm Low Noise Cooling Fan
7. T-Power Ac Adapter Compatible with 12V DC Adapter Compatible with O2 Cool O2Cool Portable 10" Cooling Fan 02 Cool 02Cool Charger Power Supply
Description
POWER SPECS : Input Voltage Range: AC 100V – 240V
Compatible with: Ktec KA12D120070045U
12V AC / DC Adapter O2 Cool Portable 10″ Cooling Fan O2 Cool 10″ Smart Power FD10006 FD10006AU Portable Fan
O2 Cool #1053 10 Indoor/Outdoor Battery Operated Portable Cooling Fan
T-Power – manufactured with the highest quality materials and include multiple smart features safeguarding against IV – incorrect voltage, SC – short circuit, IO – internal overheating. CE/FCC/RoHS certified
O2COOL are registered trademarks of MIDDLETON O2COOL LLC . Products are O2COOL compatible and not endorsed by MIDDLETON O2COOL LLC .
8. CRJ Full Speed 12V Voltage Step-Up USB to Dual 3-Pin and 4-Pin PC Fan Sleeved Power Adapter Cable
Feature
- This USB Cable Allows You To Power Up To 2 Case Fans (Both 3-Pin And 4-Pin) From A USB Connection
- 12V Voltage Boost: Inside The USB Housing Is A Step-Up Circuit That Boosts The USB 5V To 12V Allowing PC Fans To Operate At Full Speed
- High Quality Construction Features Upgraded 22 AWG Power Wires And High Density Black Sleeving
- NOTE: Due To USB Port Current Limitations It Is Not Recommend Using Fans That Combined Require More Than 0.5 Amps At 12V
- Cable Length (Including Connectors): 22″ / 55cm
Description
The CRJ Electronics USB fan cable line of products offers people a convenient way of powering PC fans with a standard USB port. Featuring an internal voltage step-up module you can power up to two 3-pin or 4-pin PC fans with 12V power for full speed operation. It is important to not exceed the current limitation of 0.5 Amps @ 12V (6W) which is a design limitation of conventional USB ports.
9. Universal Compact Bench Power Supply – 6 Amp Linear Regulated Home Lab Benchtop AC-to-DC 12V Converter w/ 13.8 Volt DC 115V AC 100 Watt Power Input, Screw Type Terminals, Cooling Fan – Pyramid PS8KX
Feature
- CONVERTS AC TO DC: The Pyramid Bench Power Supply features linear / regulated design. Provides convenient and reliable AC-to-DC power conversion (12V DC) w/ constant source of DC voltage. Works w/ cellular phones, CB radio, scanner, HAM radio, etc
- SCREW-TYPE TERMINALS: Features universal hardwired screw-type connection terminals that ensure compatibility with a wide range of devices, equipments and components. Used for component and device equipment testing, operation and performance
- PLUG-IN OPERATION: The simple plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion. Switch-activated power control eliminates the need of an external battery or additional power source
- SHORT-CIRCUIT PROTECTION: Equipped w/ built-in electronic overload and short circuit protection to ensure safety of the operator and any connected electrical devices. Also fuse protected w/ auto reset. Perfectly safe for tabletop or desktop placement
- BUILT-IN COOLING FAN: The power converter features a cabinet heatsink and a built-in cooling fan to prevent the device from overheating. Constant amperage is 6A and surge is 8A w/ power output of 13.8V DC and 115V AC 60Hz 100W power input
Description
Pyramid Model : PS8KX
6 Amp Hobbyist Bench Power Supply
Bench Power Supply, AC-to-DC Power Converter (6 Amp)
Features:
Technical Specs:
The Pyramid Power Supply provides convenient and reliable AC-to-DC power performance. Universal hardwired screw-type connection terminals are hassle-free and ensure compatibility with a wide range of device equipment & components. Simple electronic plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion. Switch-activated power control eliminates the need of an external battery or an additional power source — while the built-in electronic overload, short-circuit and overload protection ensure safety for the operator & any connected electrical devices. The Pyramid Bench Power Supply makes for a great addition to any hobbyist work desk or equipment testing station.
10. Pyramid Universal Compact Bench Power Supply – 10 Amp Linear Regulated Home Lab Benchtop AC-to-DC 12V Converter w/ 13.8 Volt DC 115V AC 250 Watt Input, Screw Type Terminals, Cooling Fan, LED
Feature
- CONVERTS AC TO DC: The Pyramid Bench Power Supply features linear / regulated design. Provides convenient and reliable AC-to-DC power conversion (12V DC) w/ constant source of DC voltage. Works w/ cellular phones, CB radio, scanner, HAM radio, etc
- SCREW-TYPE TERMINALS: Features universal hardwired screw-type connection terminals that ensure compatibility with a wide range of devices, equipments and components. Used for component and device equipment testing, operation and performance
- PLUG-IN OPERATION: The simple plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion. Switch-activated power control eliminates the need of an external battery or additional power source
- BUILT-IN COOLING FAN: The power converter features a cabinet heatsink and a built-in cooling fan to prevent the device from overheating. Constant amperage is 10A and surge is 12A w/ power output of 13.8V DC and 115V AC 60Hz 250W power input
- SHORT-CIRCUIT PROTECTION: Equipped w/ built-in electronic overload and short circuit protection to ensure safety of the operator and any connected electrical devices. Also fuse protected w/ auto reset. Perfectly safe for tabletop or desktop placement
Description
Features: – Linear / Regulated Power Supply Design – AC-to-DC Power Conversion (12V DC) – Provides Constant Source of DC Voltage – Simple Electronic Plug-in Operation – Hassle-Free Screw Terminal Connectors – Eliminates the Need of Battery or External Power Source – Fuse Protected with Auto-Reset – Electronic Overload & Short Circuit Protection – Used for Component & Device Equipment Testing, Operation & Performance – Rugged & Durable Housing Construction, Cabinet Heatsink – LED Indicator Lights – Built-in Cooling Fan – Power ON / OFF Switch – Pyramid Compact Hobby Power Supplies Safe for Tabletop Placement Technical Specs: – Amperage: 10.0 AMP (Constant), 12.0 AMP (Surge) – Connectors/Hardwire Terminals: Red Positive (+), Black Negative (-) – Power Output: 13.8V DC – Power Input: 115V AC, 60Hz (250 Watt) – Dimensions (L x W x H): 7.9” x 7.2” x 4.7” -inches
Conclusion
By our suggestions above, we hope that you can found 12 Volt Cooling Fan Power Supply for you.Please don’t forget to share your experience by comment in this post. Thank you!