We spent many hours on research to finding 1967 johnson 3 hp outboard fuel ine, reading product features, product specifications for this guide. For those of you who wish to the best 1967 johnson 3 hp outboard fuel ine, you should not miss this article. 1967 johnson 3 hp outboard fuel ine coming in a variety of types but also different price range. The following is the top 10 1967 johnson 3 hp outboard fuel ine by our suggestions
561 reviews analysed
1. HBD Thermoid NBR/PVC SAE30R6 Fuel Line Hose, 3/8" x 25′ Length, 0.375" ID, Black
2. Attwood Universal Fuel Line Assembly Kit with Tank Fitting,
- Includes Attwood award-winning universal sprayless Connector
- no more dangerous fuel sprays when connecting and Disconnecting pressurized lines
- Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
- Includes 3/8-Inch low-permeation fuel hose that resists kinking and hardening
- rated up to 100 degrees centigrade
- Versatile: Compatible with ethanol blended fuels, Mercury brand engines and tanks
- Attwood develops high value, engineered marine products to make life on the water easier to enjoy
3. Five Oceans EPA Fuel Line Kit for OMC, Johnson & Evinrude 6 ft x 3/8 inches Hose FO-4281
- OMC JOHNSON EVINRUDE compatible engine and tank connectors – Length: 6 FT
- MEETS current Environmental Protection Agency (EPA) regulations
- PRIMER BULB with a 3/8 inches OMC Johnson Evinrude Hose Connector
- COMPATIBLE with ethanol blended fuels
- MEETS and EXCEED fuel flow requirements for OMC outboards
4. Ogrmar Fuel Line Assembly 3/8" Inner Dia 5/8" Outer Dia Hose Line Marine Outboard Boat Motor RVs Fuel Assembly with Primer Bulb Steel Hose Clamps 6FT
- Universal Fuel Line – 3/8″ （10mm）Hose with 6ft long line. Hose inner diameter: 3/8″ (10mm), outer diameter: 5/8″ (16mm).
- Compatible with ethanol blended fuels, Engineered low permeation material prevents fuel evaporation, Suitable for Boats, RVs, Tractors, and Caravans.
- Dual check valves allow priming in multiple orientations without restricting fuel flow.
- Premium quality rubber bulb with rubber line hose, Stainless steel clamps.
- Note: This is rubber product, please do not store this item under direct sunlight, high temperature or other rough environment.
Hose inner diameter: 3/8″ (10mm), outer diameter: 5/8″ (16mm)
Length: 6 ft
Universal Marine Fuel Line Outboard Primer Bulb for Boats, which both come in a 3/8” (bulb/hose). Designed with premium quality rubber material that meets a wide range of temperatures and reinforced durability.
Dual check valves allow priming in multiple orientations without restricting fuel flow.
5. Attwood Johnson/Evinrude/OMC Fuel Hose Fitting
Attwood Fuel Hose Fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Barbed fittings fit 5/16″ I.D. hose. Use thread sealant on all threads.
6. LDR Industries 516F385 5′ Bag Fuel Line, 3/8"
7. ACDelco 32104 Professional 25 ft Bulk Reel of 3/8 in Fuel Line/PCV/EEC Hose
- Nitrile tube that is spiral reinforced for enhanced durability
- NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments
- Vacuum rating of 24 in/Hg for sizes less than 1?2 in I.D., and 10 in/Hg for sizes 1?2 in to 3?4 in I.D. at ambient temperatures
- Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications
- Intended for use with fuels where MTBE concentrations are no greater than 15% by volume
8. attwood 8838US6 Universal Male and Female Sprayless Connector with Thread Sealant
Safely eliminate dangerous spraying of fuel when connecting or disconnecting pressurized hoses during fueling or maintenance. Comes complete with thread-sealer for fast, easy installation; no additional supplies required. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.
9. Brass Quick-Connect Tank Fitting 1/4-Inch NPT Male Thread for Johnson/Evinrude/OMC
- Solid machined brass for dependable performance, peace of mind
- Quick-connect ¼-inch male thread makes installation easy
- Extremely versatile
- designed for leaded, unleaded, and alcohol-blended fuel
- Specifically designed for Johnson/Evinrude/OMC Brand engines and tanks
- Attwood products are both compatible and reliable, engineered and built with a never-fail attitude
Connect your tank and fuel lines with confidence; solid machined brass construction holds up to leaded, unleaded, and alcohol-based fuels. Specifically designed for Johnson/Evinrude/OMC Brand engines and tanks. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.
10. Polaris 2013-2019 Ranger Fuel Line 2521226 New Oem
Polaris Fuel Line Part Number: 2521226
Substitutes/Replacement for: 2521226
This Part is known to be Compatible with the following vehicles:
Polaris Ranger Crew 900: 2014-2016
Polaris Ranger Crew 900-5: 2016
Polaris Ranger Crew 900-6: 2016
Polaris Ranger Crew XP 1000: 2017-2018
Polaris Ranger Crew XP 900: 2017-2019
Polaris Ranger XP 1000: 2017
Polaris Ranger XP 900: 2013-2019
By our suggestions above, we hope that you can found 1967 Johnson 3 Hp Outboard Fuel Ine for you.Please don’t forget to share your experience by comment in this post. Thank you!