Finding your suitable readers for baileigh ts-1248p-52 5 hp is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for baileigh ts-1248p-52 5 hp including detail information and customer reviews. Let’s find out which is your favorite one.
961 reviews analysed
1. Baileigh AS-350M Manual Abrasive Chop Saw with Cast Base and Head, 3-Phase 220V, 7.5hp Motor, 14" Blade, 4300 RPM Speed
Baileigh manual abrasive chop saw abrasive chop saw from Baileigh Industrial might just be the perfect choice. Built using the years of knowledge gained through the sales of our industrial line of cold saws, the AS-350M was made for years of trouble free use. 220 volt/3-phase manually operated abrasive cut-off saw. 14-inches blade diameter. Abrasive chop saw features a 14-inches abrasive cut off blade and has a mitering head that can miter 45 degrees left or right. Chop saws this machine comes standard with a cast base and head that are mounted on a sturdy steel cabinet to help reduce vibration and increase blade life during the cutting process. Also included with the heavy duty vise that includes a taper lock, allowing for fast material changes. Abrasive chop saw has a powerful 7.5 horsepower motor that requires 220 Volts of 3-phase power. This type of power can get the blade turning up to 4300 rpm in seconds and can maintain its strength under full capacity. This is a perfect chop saw for tubing and pipe, bar stock, angle iron and much more. Capacity round 45 degree: 4-inches. Capacity round 90 degree: 4.5-inches. Capacity rectangle 90 degree: 5.5-inches by 3.5-inches. Capacity rectangle 45 degree: 2.5-inches by 3-inches. Blade size: 14-inches. Maximum vise opening: 6.5-inches. Drive: belt.
2. Baileigh HSP-30A Air/Hand Operated H-Frame Shop Press, 30 Tons, 22-1/2" Working Width
3. Baileigh CS-315EU Manual Circular Cold Saw, 1-Phase 220V, 2.5hp Motor, 12-1/2" Blade Diameter
- European style manually operated cold saw
- It is a powerful machine that can cut through solids, tubing or pipe
- Includes coolant system
- Includes a heavy duty steel base that is set at the optimal cutting height
- This is the perfect machine for small to medium fabricating shops and best yet it requires just 220 volts, 60 hertz, 1-phase power
Baileigh circular cold saw is the flagship of our EU line of cold saws. It designed to give any shop years of service without breaking the bank. The cold saw is a powerful machine that can cut through solids, tubing or pipe. The head has a strong motor coupled to a direct drive gear box that allows the blade to cut through the material chatter free which increases blade life. The saw has a thick cast iron base making it very rigid. Includes a heavy duty steel base that is set at the optimal cutting height. This is the perfect machine for small to medium fabricating shops and best yet it requires just 220 Volt, 60Hz, 1-Phase power. Spins at 52 revolutions per minute. Perfect for mild steel cutting, but it will also handle other material with the proper blade. Like all other Baileigh circular cold saws, it comes with a powerful integrated coolant pump that cools the blade and washes chips away. It can miter 45 degree to the left and 45 degree to the right. The vise has a taper lock system that helps increase production when a lot of cutting is required. The vise on cold saw clamps on both sides of the cut increasing blade life. The vise jaws are serrated for maximum hold. Maximum blade diameter: 12-1/2-inches; operation: manual; head miter: 45 degree left and 45 degree right; round solid at 45 degree: 2- inches; square tube at 45 degree: 3-13/64-inches by 3-13/64-inches; round tube at 45 degree: 4-inches; rectangle tube at 45 degree: 3-1/4-inches by 2-3/4-inches; round solid at 90 degree: 2-inches; rectangle tube at 90 degree: 4-1/4-inches by 2-3/4-inches; square tube at 90 degree: 3-13/64-inches by 3-13/64-inches; round tube at 90 degree: 4-inches; coolant system: yes; vice style: single action with cam lock; maximum vice opening: 4-23/32-inches; head style: pivot; arbor size: 1-17/64-inches; motor: 2.5 horsepower; blade speed: 52 revolutions per minute; power: 220 volts/1-phase.
4. Baileigh BS-712MS Horizontal and Vertical Band Saw, 1-Phase 110/220V, 1hp Motor
- 2 MACHINES IN 1: Use as a horizontal or vertical band saw.
- SWIVEL HEAD FOR MITERING: Allows for faster production times and less waste than you’d get with a moving vise.
- 3 CUTTING SPEEDS: 125, 215, and 270 fpm.
- CAST IRON HEAD AND BOW: Ensures proper alignment during the cutting process and helps the saw last for years.
- FULLY-WELDED STEEL PLATE FRAMEWORK: Keeps the machine stable and gives it the structural strength to tackle its maximum capacity.
The Baileigh BS-712MS band saw is one of the most versatile horizontal band saws on the market. The design includes a heavy-duty cast iron swivel head to do its mitering, instead of the vise. This feature allows for faster production times and less waste. The machine also features wheels to make it portable.
The BS-712MS can be run in the traditional horizontal position for general cut offs, or in a vertical position by just lifting the bow and locking it in place, for doing precise shape cutting (this is extremely important when space is at a premium). The best part is that in the horizontal position, the horizontal and vertical band saw has a 7-inch OD round and a 7-inch x 10.25-inch rectangle capacity.
The head and bow of this horizontal and vertical band saw are made from heavy-duty cast iron that has been precisely machined to exacting tolerances, to ensure proper alignment is maintained during the cutting process. A pair of adjustable guides attached to the heavy-duty head, along with eight sealed ball bearings, help to align and increase the life of the blade. Add a chip removal brush and a flood coolant system to this band saw, and you have one great package.
Baileigh covers this metal-cutting band saw with a one-year parts warranty and lifetime technical support by phone.
5. Baileigh TN-210H Manual Hole Saw Notcher
- MAXIMUM CAPACITY OF 2-INCH ROUND TUBE
- BUILT FROM 1/2-INCH PLATE STEEL: This hole saw notcher comes at an economical price.
- 1-INCH GROUND AND POLISHED SPINDLE SHAFT: Reduces vibrations and prolongs the machine’s lifetime of use.
- SOLIDLY-BUILT STEEL PLATE FRAME: Maintains accuracy and adds strength to the tube notcher.
- INDUSTRIAL-GRADE NEEDLE BEARINGS ARE REPLACEABLE: You can extend the life of the machine by eventually swapping them out.
The Baileigh TN-210H hole saw notcher is the ideal tube notching machine for the economical garage fabricator that needs to assemble and weld tubing at varying angles for applications such as mud racers, rock crawlers, midget cars, go karts, and much more. This product can be vertically mounted in a drill press, or for larger pieces it can be horizontally mounted on a weld bench or in a vise, and powered by a portable drill.
This hole saw tube notcher is made of thick 1/2-inch plate steel, with a set of industrial-grade needle bearings that are replaceable should the need ever arise. The spindle is made of a 1-inch ground and polished shaft for longevity and less vibration. This hole saw notcher can notch angles up to 50 degrees in less than 30 seconds, and has a capacity of up to 2-inch round tube.
Baileigh covers this hole saw notcher with a one-year parts warranty and lifetime technical support by phone.
6. Baileigh R-M3 Manual Roll Bender
Have you ever needed to work with small material under 1/4-inch? If so the bender from Baileigh might be you answer. This Baileigh bender metal ring roller is perfect for any fabrication shop. The roll bender easily makes precise bending small rod up to 1/4-inch. Metal artists, technical schools, and home shops can find hundreds of uses to keep this well-built angle roll in use. This Baileigh bender is made using only the best plate steel, ensuring years of productivity. The bender is a single-pinch metal ring roller that can be bench or pedestal mounted. It has fine adjustment for the top roll, and to power this ring roller there is a manual hand crank.
Baileigh covers this roll bender with a one-year parts warranty and lifetime technical support by phone.
By our suggestions above, we hope that you can found Baileigh Ts1248p52 5 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!