Top 10 Ninja Ultima Blender 830 Replacement Parts

0
535 reviews analysed

1. Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640

Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640

Feature

Description

One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.

KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

2. NLSD Ninja Blender Replacement Parts Ninja Bottom Blade 6 Fins for Nutri Ninja Auto iQ BL482 BL456 Blenders (FEMALE FINS ONLY)

NLSD Ninja Blender Replacement Parts Ninja Bottom Blade 6 Fins for Nutri Ninja Auto iQ BL482 BL456 Blenders (FEMALE FINS ONLY)

Feature

Description

Color:1 Pack

BEFORE PURCHASING you need to check your Old Blade to make sure the following,.

1) Count the FINS IT SHOULD BE 6-FINS.
2) The blade has FEMALE FINS
3) 4″ (10cm) Diameter.

BEFORE PURCHASING Please check all the images on this Product Detail page to make sure you are buying the right Blade for your Blender.

Warranty Policy
●All products sold by NLSD are covered by 3 months warranty.
●NLSD endeavours to provide customer with new replacement for any product within 15 days from the date of purchase.
●If a customer received a product which is faulty or damaded on arrival, please notify us within 15 days.
●Beyond 15 days, NLSD will provide customer a refund, exchange or repair the product.

3. Blender Blade Replacement Parts for Ninja 16 oz Blender Cup, 6 Fins Blender Extractor Blade Replacement,4 Blade Assembly For Nutri Ninja Bl770, Bl771, Bl773co,Bl780, Bl660, Bl740

Blender Blade Replacement Parts for Ninja 16 oz Blender Cup, 6 Fins Blender Extractor Blade Replacement,4 Blade Assembly For Nutri Ninja Bl770, Bl771, Bl773co,Bl780, Bl660, Bl740

Feature

4. Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz

Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz

Feature

Description

NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70

DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30

5. 3x Rubber Gasket Replacement Parts for 2.5" 6 pin Rubber Blade Nutri Ninja BL770 30 BL771 30 BL773 30 BL780 30 Blender (NOT For any other Ninja series)

3x Rubber Gasket Replacement Parts for 2.5" 6 pin Rubber Blade Nutri Ninja BL770 30 BL771 30 BL773 30 BL780 30 Blender (NOT For any other Ninja series)

Feature

Description

This listing is only for 6-fin Ninja BL770 BL771 BL773 BL780 Blender

6. Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 6 Fins Replacement Extractor Blade for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL450-70 BL451-70 BL482-70

Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 6 Fins Replacement Extractor Blade for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL450-70 BL451-70 BL482-70

Feature

7. 7 Fins Ninja Replacement Extractor, Nutri Ninjia Blender Blade with 2 Rubber Gadketes, 1000W Juicer Accessory fits BL2012 BL2013 BL480 BL480D BL481 BL482 BL486CO BL487 BL487A BL488W BL490 BL491 BL492

7 Fins Ninja Replacement Extractor, Nutri Ninjia Blender Blade with 2 Rubber Gadketes, 1000W Juicer Accessory fits BL2012 BL2013 BL480 BL480D BL481 BL482 BL486CO BL487 BL487A BL488W BL490 BL491 BL492

Feature

8. SunnyMemory Blender Replacement Parts for Ninja 7 Fins Bottom Blade, 1 replacement blade, 2 Gaskets, 1 Gasket Pick for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Blade

SunnyMemory Blender Replacement Parts for Ninja 7 Fins Bottom Blade, 1 replacement blade, 2 Gaskets, 1 Gasket Pick for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Blade

Feature

Description

Compatible Blender Model: Nutri Ninja Auto iQ BL2012, BL2013, BL455, BL455-30, BL480, BL480D, BL481, BL482, BL482-30, BL685-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492, BL492W, BL640, BL641, BL641-30, BL642, BL642-30, BL642W, BL642Z, BL450-30, BL680A, BL485, BL680A-30, BL681A, BL682, BL682-30, BL687CO, NN100, NN100A, NN101, NN102, NN101-30, BL2012, CT680SS, CT680CO2SS.
Not Compatible with the Blender Model:BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70.
Product Package
1 X Replacement Bottom Blade
3 X Replacement Rubber Gasket(One is already on the bottom blade)
1 X Gasket Pick
24-hour after-sales service We will respond to you and solve your problems within 24 hours. Thank you for your support.

9. Base Gear for Magic Bullet Blender MB1001 250W Blade Gear Replacement Part

Base Gear for Magic Bullet Blender MB1001 250W Blade Gear Replacement Part

Feature

10. GEVIN Replacement Parts Blender, Extractor Blade Assembly with 7 Fins on Bottom For Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013(7Fins)

GEVIN Replacement Parts Blender, Extractor Blade Assembly with 7 Fins on Bottom For Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013(7Fins)

Feature

Description

Description:

– Item Type: Ninja Blender Replacement Parts for blender

– This Ninja Blender Accessories Suit for: BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

– Not fit for BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.


NOTE:

Two conditions must be met at the same time before purchase

1: Your original motor base must be 7 fins;

2: Your blender model must identity with our stated model.

Pay attention to before use :

◆ Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.

◆ Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)

◆ Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.

◆ Place the replacement blade onto the cup and screw it tightly until you have a good seal.

◆ Please make sure it in right place and locked tightly.

◆ Do not run your blender over 4 minutes at a time to prevent overheating of the blender.


Packing including:

1 x Ninja blade Replacement

1 x Extra Gasket Rubber

You are recommended to replace your ninja blender every 6 months or as needed for optimal performance. 

Conclusion

By our suggestions above, we hope that you can found Ninja Ultima Blender 830 Replacement Parts for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general