The Best Vw Cooling Liquid

Formulated for long-lasting corrosion and rust protection for all cooling system components, this prediluted antifreeze/engine coolant prevents the use of poor quality water that can lead to cooling system failure.

Engine Ice Hi-Performance Coolant is biodegradable, phosphate free and non-toxic, typically reduces operating race temperatures and effectively keeping boil over temperatures to 256° Fahrenheit or less and freeze-up protection to -26° Fahrenheit. With an average reduction in operating temperatures of 10° Fahrenheit – 20° Fahrenheit Engine Ice is perfect for racing or street, motorcycle or auto, ATV or snow machine. Engine Ice Hi-Performance Coolant is legal in CCS and ASRA road racing and permitted at many tracks around the world. Engineered to keep your operating temperatures at optimum performance to not lose power through excess heat. Engine Ice is safe for aluminum and most all metals. Uses propylene glycol, which has been proven to eliminate water pump gasket and seal failures. It has also shown in high load, high stress conditions to reduce operating temperatures more than standard coolants.

THEROCURE by Evapo-Rust cures engine overheating by removing the rust from your cooling system. If your car, truck, or tractor is overheating, try Thermocure. Just 1 quart will service cooling systems up to 3 gallons. THERMOCURE Cooling System Rust Remover & Flush uses the technology in rust and corrosion removal to completely revitalize any water cooled engine. It removes rust scale and deposits from radiators, water pumps, water jackets, engine blocks, and heads. Thermocure will restore your engine’s ability to transfer heat to the coolant, which allows engines to run cooler and last longer. Thermocure is non-toxic, contains no acids, is biodegradable, safe on skin, and has no fumes. THERMOCURE Removes even heavy rust completely, is non-toxic, non-corrosive, is safe on skin and eyes. Contains NO acids, bases, solvents or other toxic ingredients, it will not harm un-rusted steel, safe on other metals, plastic, PVC and most paints.

Maxima Coolanol is a ready-to-use 50/50 blend of premium quality ethylene glycol based antifreeze and deionized water to provide optimum rust and corrosion protection for all aluminum and magnesium motorcycle and ATV liquid cooled engines. Coolanol also contains anti-foam agents to reduce water pump cavitation and increase cooling capacity. Coolanol 50/50 blend protects from freeze-ups in winter down to -34 Degree Fahrenheit. Coolanol also raises your cooling systems boiling point to 265 Degree Fahrenheit with a 15 pound radiator cap. This extremely low-silicate fluid is ideally suited for all motorcycle applications. Contains bittering agent.

Genuine SOA635071 Engine Coolant AdditiveNo Core Charge RequiredParts Interchange SOA635071, SOA635071, 97149003001, 971 49003 001

KOOL-IT Supreme Coolant Treatment is chemically engineered to reduce the surface tension of a coolant, thus allowing it to more deeply penetrate metal surfaces at vital heat transfer areas. This decreases operating temperatures and significantly reduces the possibility of engine overheating.

KOOL-IT is ideal for: Cars, Trucks, RV’s, Towing applications and Racing/performance vehicles.

Benefits include:
Enhances heat transfer and reduces operating temperatures
Extends coolant life up to 5 years
Prevents cooling system corrosion
Protects all metals from electrolysis
Prevents deposits which lead to overheating
Reduces wet-sleeve cylinder liner cavitation erosion

This product does not contain ethylene glycol.

ANTI-FREEZE WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc. It is suitable for all extreme conditions and guarantees full performance from -40 Degree Celsius to over 130 Degree Celsius system temperature.

“WARNING: This product contains substances known to the State of California to cause birth defects or other developmental harm.”

Maxima Engine Cool-Aide is formulated to reduce engine temperatures and provides significantly better contact on heated surfaces allowing for greater and more efficient heat transfer. Cool-Aide protects against rust and corrosion plus it mixes with water and antifreeze. 100 percent Biodegradable in its unused form, Cool-Aide is for race use and does not offer freeze protection. Approved for race use on paved surfaces. FEATURES: Approved for racing on paved surfaces; Increases cooling capacity and efficiency; Glycol, Nitrate, Amine, Borax Free; Protects against rust and corrosion; For 2-cycle or 4-cycle liquid cooled engines; 100 percent Biodegradable in its unused form; Does not offer freeze protection. Does not contain ethylene glycol.